Categories

CONTACT US

Henan Peffer Industrial Co.,Ltd
Add: Room1203, Bldg.B, ZenSun International Plaza, Hanghai Road(east), Guancheng, Zhengzhou, Henan
Tel: +86-371-86603919
Fax: +86-371-86603919
Ph: 0086 15518158199
E-mail:gwyneth@peffer.cn

Factory Directly Supply Manual Embossing Comb Sheet Making Beeswax Foundation Roller Machine Automatic Trimming

manual embossing comb sheet making beeswax foundation roller machine Automatic trimming The beeswax machine rollers are designed for smooth rolling tape or bee wax sheets and manually producing honeycombs. Angle rolls cell is 120 degrees, which corresponds to the marking " BEE Max" (as...

Send Inquiry

Product Details

manual embossing comb sheet making beeswax foundation roller machine Automatic trimming

The beeswax machine rollers are designed for smooth rolling tape or bee wax sheets and manually producing honeycombs. Angle rolls cell is 120 degrees, which corresponds to the marking " BEE Max" (as close as possible to the natural angle for bees)
Production smooth plates: Combs made of thin plates of bee wax which is most simply obtained by immersing or thin glass plates (or,for example,plywood) with a size of 400 × 265 × 3 mm in the molten wax (template edges are not to be beveled.) Good practice is to have a wooden board dipped into oversaturated salt solution beforehand (concentration is reached when salt stops dissolving). Then a template should be put into cold water (6-12°C) for 6-8 seconds. If you are using glass template, add some wash up liquid into the water: that will prevent wax sticking to template. After that shake the template or wipe remaining water with a sponge and put it into liquid wax. Use a container of appropriate size for this purpose; the most common size of wax container is: length 280-300mm; width 40-50mm; height 410-450mm. Material of wax container should be inert to wax: stainless steel, aluminum, white iron or galvanized white steel (worse).


Specification:

Material: Aluminum Alloy

Cell Size: 5.4mm or 4.9mm

Roller Length:310mm

Cylinder Diameter:86mm



Inquiry